You are here

Reduce Energy Consumption with Intelligent Lighting Systems

In the United States alone, the Energy Information Administration estimates that in 2011, we used 461 billion kWh to light our residential and commercial properties. That equals about 12 percent of the total electricity consumed in North America.

Our first response to these numbers is to reiterate to ourselves that we should be turning off the lights when the rooms are empty. But that really depends on the light bulb you have installed. For example, with an incandescent light bulb, you have a 90 percent energy loss when it’s on, so keep that thing off as much as possible. Halogens, too, should be turned off whenever possible. Yet, when it comes to compact fluorescent lights (CFLs), they can consume more energy by being turned on and off than by just staying on, depending on how often you turn them off (Hint: If you’re coming back into the room in 15 minutes, leave it on).

The recommendations are confusing, and if you’re like me, you don’t pay attention to the type of light you have in the room. And maybe, like me, you hear your father’s voice yelling in your head to “turn off that light” every time you leave the room. Bad advice, since now I’m turning on and off my hallway CFL light bulb a few dozen times a night as I pass in and out of rooms.

This is why the new smart home market, especially smart lighting, is so important. We shouldn’t have to know what type of light bulb is in a fixture, or know what type of energy loss the bulb has. Actually, why do we even have to turn on and off lights at all? With sensors, the bulbs can figure out themselves if we’re in the room or not, and if we add in a hub and some sensor fusion, the smart lighting in your house will even be able to figure out your habits and trends to estimate how long you’ll be out of the room.

Want to save energy? This is a good place to look. Smart lighting has some amazing potential not just to reduce our energy consumption, but also change our lives with smart controls and pattern recognition, which is why Semico is hosting a half-day conference on Smart Lighting and Building Automation in Santa Clara on April 23. Secure your seat by registering now!

Cross-posted at Electronic Purchasing Strategies

Comments

I had always heard that turning fluorescents on and off decreased their lifetime.   The cost of a new bulb (and of the physical plant person to install it) was greater than the cost of the energy saved.   I don't know if that's true for modern ballasts and bulbs; they may be more reliable than that.

If it was really a matter of energy savings, then the bulb would have to store something like 15 minutes of energy in it or its ballast.   For a 40W bulb that would be 36 Kjoules, which would be a lot for a capacitor.  

Pages

Add new comment

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

Monthly archive

Twitter

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer